Bike For Professional
800$
HP Charcoal
OUR NEW ARTICLES
CERAMIC XTREME PLUS 70 INTRODUCED
Solar Control Films Announces Release of its Newest Window Film: Ceramic Xtreme Plus 70
Solar Control Films is proud to announce our newest window tint film the Ceramic Xtreme Plus 70. Available for purchase by calling:Â 832-667-8822
- High IR rejection of 92% (Near InfraRed Rejection)
- 70% Clear Visibility (VLT)
- High Heat Rejection of 51%
- UV rejection of more than 99%
- Nano Ceramic structure provides a long lasting life & consistent IR rejection
- The 2 mil structure also provides protection from shattered glass
- Available in 36″ & 72″ widths
Solar Control Films, Inc. Resources
To shop our complete line of window films and installer accessories visit: WindowTintPro.com For more information about our superior window film, call us Toll Free at 877-989-3456 or fill out the information below and one of our window film specialist will be in contact with you immediately.
HOW DOES SOLAR WINDOW FILM WORK?
Let’s get technical about window film:
Solar films, metalized reflective tint, block up to 88% of the solar energy from entering your home or office; thus reducing the load on your A/C system and saving energy. If you buy a solar film with a Shading Coefficient of .18, such as a Dual Reflective 5%, it will conserve up to 12.5 kWh of energy per year per square foot (SF) in Houston, TX. A consumer that buys energy for $.16 per kWh will save an estimated $2.00 per year per SF with an efficient HVAC system and save even more with a less efficient HVAC system.
So what does that mean to you?
Homes & offices with 3,000 square feet of windows with reflective film can save as much as $6,000 per year if they buy and install solar tint. Solar window film can reduce the peak demand on electrical utilities because solar tint conserves energy between the peak energy demand period from 10 AM to 4 PM. Moreover, the lower the overall energy consumption resulting from solar window film decreases the demand for new CO2 producing power facilities, in turn resulting in decreased emissions and a smaller overall carbon footprint.
Reflective tint is the most effective way to conserve energy because it’s cost effective, has a quick payback period and has immediate results in conserving energy: Once installed, solar tint starts saving you money. Solar Control Window Film is a very efficient way to conserve energy, save you money and maintain a comfortable temperature for your home and office.
Learn More About Solar Control Films:
- Automotive Window Tint
- Commercial Window Film
- Architectural Window Film Tint
- Decorative & Designer Window Film
- Safety Window Film
- Paint Protection Film
Buy Window Tint At Great Prices:
- Car Tint & Automotive Window Film
- Commercial Window Film
- Decorative & Safety Window Film
- Vinyl & Paint Protection Film
- Window Tint Installation Tools
Solar Control Films, Inc. Resources
To shop our complete line of window films and installer accessories visit: WindowTintPro.com For more information about our superior window film, call us Toll Free at 877-989-3456 or fill out the information below and one of our window film specialist will be in contact with you immediately.
HOW SOLAR WINDOW TINT IS MADE?
How Reflective Window Film Is Made?
Solar Window film starts as Polyethylene Terephthalate (PET) pellets that are melted. PET is used because of its excellent optical clarity and strength. The melted material is then biaxially streched into a polyester sheet, meaning it is stretched in the direction of both its length and width. UV blockers are usually added during this process.
The next phase of construction is to add dyes or metals to the polyester sheeting. The materials chosen will be determined by the desired performance of the film and its application. Dyed films absorb a lot of heat, and therefore are generally used for automotive applications. Metallized films work in the opposite, rejecting most of the heat rather than absorbing it and are most common for residential/commercial films.
Dyeing – The polyester film is coated and then cured in heated ovens. The pigments are impregnated into the polyester by the heat. The color becomes a permanent part of the film and will not wash off.
Metallizing – can be achieved through three processes:
Evaporative Coating – A crucible containing metal is heated until the metal melts and forms a gas cloud. This metal gas is deposited on the film and bonds as soon as it cools. Aluminum is the metal of choice because of its low melting point.
Electron Beam Coating – This method is similar to the evaporative method except that a beam of high-energy electrons is aimed at the source of metal to heat it. This energy causes the metal to vaporize and form a cloud of gas that deposits on the polyester sheet.
Sputtering – An electrically charged gas, such as argon, bombards the metal and frees the molecules. These molecules are deposited onto the film and layered side by side, providing extremely thin and precise coatings. This coating is so tight that the water used during installation cannot evaporate, which causes a hazy look. This hazy look will go away after two to three weeks of curing.
Next, a scratch-resistant coating is applied to the side that will face the interior of the home. This coating acts as a protective barrier against dust and debris or for anything that may come into contact with the film. A great scratch-resistant coating is a key element for longevity.
After the scratch-resistant coating phase, the mounting adhesive is applied to the side of the film that will be applied to the window. An aggressive adhesive is also needed to provide longevity and ensure the film does not bubble or peel. Adhesives come in a pressure sensitive (sticky) type for automotive, and a clear dry adhesive that utilizes a gel covering activated by water for residential/commercial films.
Finally, the film is covered with a liner over the adhesive that is peeled away during the installation process. The liner acts as a guard against contamination from dust and debris. Multiple plies may be joined together to provide extra performance and durability.
Solar Control Films, Inc. Resources
To shop our complete line of window films and installer accessories visit: WindowTintPro.com For more information about our superior window film, call us Toll Free at 877-989-3456 or fill out the information below and one of our window film specialist will be in contact with you immediately.
PROTECT YOURSELF! GET TINTED.
How Window Tint Can Protect You from Harmful UV Rays
Window tinting can be great for privacy and help you save energy, but did you know that it can also protect against harmful sun rays?
The Skin Cancer Foundation highly recommends window film as a necessary preventative against UV rays that cause skin cancer. Though most think of taking preventative measures while outside and in direct contact with sunlight, few realize that the sun can do damage indoors as well!
Window film is highly effective against these harmful sun rays, and is a a great way to protect your skin, your health, and your belongings that might be damaged by Ultraviolet Radiation.
Whether we are in the car, homes or our place of work, we are susceptible to damaging UV rays. Solar Control Films is on a mission to cut back on that damage by distributing the best window film and tools, so you and your belongings remain safe from the sun’s harmful rays, but can still enjoy natural sunlight from inside your home, car, or commercial building!
For more information on the Skin Cancer Foundation and the health benefits of window film, click here!
SOAP, SHAMPOO, OR SLIME?
Choosing the Best Tinting Installation Solution
When tinting, you have to make sure you have a slippery solution between the glass and the window film. There are a few ways of achieving this effect, but which one is going to give you the best tint job for you window?
Dish Washing Liquid
Some tinters swear by mixing a few drops of dish washing liquid soap into a spray bottle full of water, and coating the window with the solution. There are a few drawbacks to this:
- Dish Washing Liquid is made for disintegrating grease, so the harsh chemicals can wear down the glue, and keep the window film from sticking properly.
- Dries fast, often times causing bubbles or streaks in the tint job
Baby Shampoo
An alternative to dish washing liquid is baby shampoo. A lot of the harsh, grease-fighting chemicals in dish washing liquid aren’t found in baby shampoo because of its gentle intended nature. However, baby shampoo still dries very quickly, and if you try to move the film after it dries, it can cause the film to scratch. The last thing you want is a scratched film.
Tint Slime
The best choice for tinting professionals everywhere is Tint Slime! Where the other options are cheaper dollar store options, Tint Slime is a product that is made specifically for window tinting. It is free of harsh chemicals and particulates, so your tint job will last longer. Tint slime makes it easy to slip the tint film when you need it to, and dries when you find the perfect placement.The choice is clear: for your best tint job, Tint Slime is the best way to make sure you get professional-looking tinted windows every time!
To order your own bottle of Tint Slime, click here!
Solar Control Films, Inc. Resources
To shop our complete line of window films and installer accessories visit: WindowTintPro.com For more information about our superior window film, call us Toll Free at 877-989-3456 or fill out the information below and one of our window film specialist will be in contact with you immediately.
